• Laser machine expressly designed for the glass sector able to process medium-small dimension glass sheets with energy consumption less than 1KW/hour. The laser with SCANNER technology is extremely fast and accurate and can quickly work large glass portions, it has no consumable parts and it is equipped with a several thousand hours working source able to: • Remove paint from the mirror leaving the glass completely transparent a system widely used by bathroom mirrors manufacturers for magnifying mirrors and varnished glass for furniture application • Remove the vitrified paint on the tempered glass leaving the glass slightly opaque, a system widely used by glass manufacturers for furniture and building to make logos and symbols on already tempered glass • Remove the coating from the reflecting glass including the mirror leaving the glass completely transparent, a system used in the furniture sector to produce furniture doors, the household appliance sector to create pictograms, etc. when translucent or transparent parts or decorations are required • Simultaneously micro-engrave and remove large bands of metal coating in the most of Low-E glass (hard and soft coating) and of the silver paste deposit (busbar), a system used by refrigerator doors manufacturers to produce anti-fog glass and heated glass (thermo furniture). • Micro engrave the metal coating of most Low-E glass (hard and soft coating) with complex geometric designs, a system used by train and environment glass manufacturers of which a permeability to radio waves of portable telephones is required
  • Laser expressly designed for the glass sector able to process small-medium sized glass sheets with energy consumption less than 1KW / hour. The BEAM technology laser is extremely precise and can work for hours without break needs, it has no consumable parts and it is equipped with a several thousand hours life source and is able to: • Remove paint from the mirror leaving the glass completely transparent, a system widely used by bathroom mirrors and furniture painted glass manufacturers • Remove the vitrified paint on the tempered glass, leaving the glass slightly opaque, a system widely used by furniture glass and building manufacturers to make logos and symbols on already tempered glass • Remove the coating from the reflecting glass including the mirror, leaving the glass completely transparent, a system used in the furniture sector to make furniture doors, in the household appliance sector to create pictograms, etc. when translucent or transparent parts or decorations are required • Micro-engrave the metal coating of most Low-E glass (hard and soft coating) including the BUSBAR in silver paste, a system used by refrigerator door manufacturers to make the glass anti-fog and to make heated glass (thermo furniture)
  • Laser expressly designed for the glass sector able to process large sheets with less than 1KW/hour electricity consumption Extremely precise laser with BEAM technology which can work for hours without break needs, it has no consumable parts and it is equipped of a source with several thousand hours life and is able to: • Remove paint from the mirror leaving the glass completely transparent, a system widely used by bathroom mirrors and furniture painted glass manufacturers • Remove the vitrified paint on the tempered glass leaving the glass slightly opaque, the system widely used by glass furniture and building manufacturers to make logos and symbols on already tempered glass • Remove the coating from the reflective glass including the dielectric glass leaving the glass completely transparent, a system used in the furniture sector to produce furniture doors, partitions, interior doors, etc. when transparent parts or decorations are required • Micro engrave the metal coating of most Low-E glass (hard and soft coating), a system used by refrigerator doors manufacturers to produce anti-fog glass and heated glass (thermo furniture)
  • Laser expressly designed for the glass sector able to process large sheets with less than 1KW/hour electricity consumption Extremely precise and fast laser with SCANNER technology which can work for hours without break needs, it has no consumable parts and it is equipped of a source with several thousand hours life and is able to: • Remove paint from the mirror leaving the glass completely transparent, a system widely used by bathroom mirrors and furniture painted glass manufacturers • Remove the vitrified paint on the tempered glass leaving the glass slightly opaque, the system widely used by glass furniture and building manufacturers to make logos and symbols on already tempered glass • Remove the coating from the reflective glass including the dielectric glass leaving the glass completely transparent, a system used in the furniture sector to produce furniture doors, partitions, interior doors, etc. when transparent parts or decorations are required • Simultaneously micro-engrave and remove large bands of metal coating of most Low-E glass (hard and soft coating) and silver paste deposit (busbar), a system used by refrigerator doors manufacturers to produce the anti-fogging glass and even to produce the heated glass (thermo furniture) • Micro engrave the metal coating of most Low-E glass (hard and soft coating) with complex geometric designs, a system used by train and environment glass manufacturers where permeability of mobile phones to radio waves is required
  • 3D laser has been designed to engrave internally (in the thickness) glass plates and colorless transparent plastic material such as plexiglass, methacrylate, etc. also mirrored on one side. The laser is able to engrave logos, writings, small numbers, images, drawings, decorations, etc. both two-dimensional and three-dimensional within transparent plates impossible to obtain with other technologies. Sub-surface laser engraving is a special technique with which we are able to visualize different shapes within a transparent plate. The laser beam penetrates the plate forming micro-opacities in certain points changing the structure of the material from transparent to opaque. The laser reaches a maximum internal engraving speed of about 10,000 points / second, so the image creation time is given by the design construction and the skill of the designer to create a drawing with an optimal dot / engraving / effect ratio. The laser can work on already laminated glass, the important thing is that at least one of the two faces is not mirrored or reflective. The laser is also able to generate engraving inside the glass that will be tempered, there are limitations for this engraving type since not all the decorations make the glass tempereable after the engraving. The machine has several working options and when it is necessary to temper the glass, the software modifies the internal geometry of the drawing making it suitable for tempering. The internal engraving can be done on almost the entire thickness of the glass, it is necessary to maintain an unworked thickness of about 1-1.5mm from each surface, so the thicker the glass, the better the result.
  • Laser expressly designed for the glass sector able to process small-medium sized glass sheets with energy consumption less than 1KW / hour. The BEAM technology laser is extremely precise and can work for hours without break needs, it has no consumable parts and it is equipped with a several thousand hours life source and is able to: • Remove paint from the mirror leaving the glass completely transparent, a system widely used by bathroom mirrors and furniture painted glass manufacturers • Remove the vitrified paint on the tempered glass, leaving the glass slightly opaque, a system widely used by furniture glass and building manufacturers to make logos and symbols on already tempered glass • Remove the coating from the reflecting glass including the mirror, leaving the glass completely transparent, a system used in the furniture sector to make furniture doors, in the household appliance sector to create pictograms, etc. when translucent or transparent parts or decorations are required • Micro-engrave the metal coating of most Low-E glass (hard and soft coating) including the BUSBAR in silver paste, a system used by refrigerator door manufacturers to make the glass anti-fog and to make heated glass (thermo furniture)
  • Equipped with fiber, UV or other laser source, specially designed for glass industry, ideal for ABLATION, ENGRAVING of any type of coating, leaving the glass fully transparent or with opaque effect, useful for coating removal and subsequent positioning of the lenses or TV screens on the mirrors, pictograms marking, etc.
  • SoftMek «HG Square» is a software specially developed and registered by Glass Company to calculate the position of the cuts (to be made with laser) of the electrically conductive coating applied to the glass, to produce HEATED GLASS with specific characteristics. The software is designed to calculate the best way in which the electric current will pass in oder to best satisfy the requests for temperature, power or resistance. In addition to carry out the calculation the program creates a DXF drawing of the circuit to be marked, to be used directly on the laser machine which performs the ablation and engraving of the coating.
  • There are several ways to cut glass with a laser: one of them is FILAMENTATION. The most advanced techniques, involve the use of ultrashort pulses with the aim of modifying the structure of the glass, creating an incision inside it. Our laser machine, which is operated by CNC, can also handle the separation of the piece from the scraps through a long-applied shock the incision. This machine is able to cut float glass with a thickness which can go from 0.5 mm up to 15 mm and, in some cases chemically tempered glass, with the following advantages: - The laser processing minimizes defects on the glass ensuring an excellent quality of the cutting profile, so as to facilitate the glass tempering and bending process; - The glass is processed without mechanical stress favoring an increase in the quality of the tempering, tested in the automotive sector; - Minimizes the need for subsequent finishing operations, such as grinding; The cut is performed without the use of external fluids (water or gas) and without the production of dust or fumes (a suction system is not necessary); - The low powers absorbed and used by the sources ensure a consumption that can reach up to 70% less than a water jet cutting machine.
  • The LASER DRILLING MACHINE is specially designed for drilling flat glass used in various sectors such as automotive, medical, furniture, photovoltaic etc. Being controlled by CNC, the machine allows the processing of slabs of large dimensions with thicknesses that can reach up to 15 mm, with the following advantages: - The use of a galvanometric head with a working area of 65 x 65mm, allows for quick and precise processing of complex drawings; - The intelligent software that manages the CNC allows chamfering to be performed during the drilling phase without further work phases; - The use of a particular laser source makes the machine resistant to industrial environments; The laser drilling process does not involve the use of liquids to cool the workpiece; - The low power absorbed and used by the machine ensures consumption up to 60% less than a normal CNC drill.

Title

Go to Top